Titanium Grade 5
Titanium
6-4
Ti-6Al-4V
|
Titanium Grade 5 alloy is the most commercially available of all titanium alloys. It offers an excellent combination of high strength and toughness. Grade 5 titanium has good welding and fabrication characteristics. |
Aerospace
Chemical Processing
Marine
Medical
|
ASME SB-265
AMS 4911
ASME SB-348
AMS 4928
AMS 4965
AMS 4967
|
Bar
Forgings
Plate
Sheet
Wire |
Titanium Grade 6
Titanium
5-2.5
5Al-2.5Sn
|
Titanium Grade 6 alloy offers good weldability, stability and strength at elevated temperatures. |
Aerospace |
ASME SB-381
AMS 4966
MIL-T-9046
MIL-T-9047
ASME SB-348
AMS 4976
AMS 4956
ASME SB-265
AMS 4910
AMS 4926 |
Bar
Forgings Plate
Sheet
Wire |
Titanium Grade 9
Titanium
3-2.5
Titanium
3Al-2.5V
|
Titanium Grade 9 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. Grade 9 Titanium can be used at higher temperatures than Grades 1 through 4. Grade 9 titanium has good cold rolling properties. |
Aerospace
Automotive
Chemical processing
Consumer applications
Marine
Medical
Transportation |
AMS 4943
AMS 4944
ASME SB-338 |
Bar
Forgings Plate
Sheet
Wire |
Titanium Grade 12
Ti +Mo +Ni
Ti-0.3-Mo-0.8Ni
|
This Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. |
Chemical processing
Desalination
Power generation
Industrial |
ASME SB-338
|
Tube |
Titanium Grade 19
Titanium
Beta C
|
Titanium Grade 19 has very high strength and can be heat treated. It offers good resistance to stress and corrosion. |
Aerospace Automobile |
MIL-T-9046
MIL-T-9047
ASME SB-348
AMS 4957
AMS 4958
ASME SB-265 |
|
Titanium Grade 23
Titanium
6-4 ELI
Titanium
6AL-4V-ELI
|
Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron. It has better ductility and fracture toughness than Titanium Grade 5. |
Aerospace
Chemical Processing
Marine
Medical |
AMS 4911
AMS 4928
AMS 4930
AMS 4931
AMS 4935
AMS 4965
AMS 4967
AMS 4985
AMS 4991
MIL -T-9046
MIL -T-9047
BSTA 10,11,12
BSTA 28,56,59
DIN 3.7165
AMS 4907 ELI
AMS 4930 ELI
AMS 4956 ELI
ASTM F136 ELI
UNS R56407 |
Bar
Forgings
Plate
Sheet
Welding Wire
Wire |
Titanium
6Al 2Sn 4Zr 2Mo
|
Titanium 6-2-4-2 has excellent strength, stability, and creep resistance to temperatures as high as 550 °C. |
Gas
Turbine Compressor Engine afterburner
Aerospace |
AMS 4919
AMS 4952
AMS 4975
DIN 3.7164
GE B50 TF22
GE B50TF21
GE B50TF22
GE C50TF7
MIL F-83142
MIL T-9046
MIL T-9047
PWA 1220
UNS R54620 |
Bar
Plate
Sheet |
Titanium
6-6-2
Titanium
6Al-6V-2Sn
|
Titanium 6Al-6V-2Sn is a two-phase, Alpha Beta Alloy. It is usually used in the annealed or solution treated and aged conditions. It’s a heat treatable, high strength alloy with lower toughness and ductility than Titanium Grade 5 (6Al-4V) and it’s difficult to weld. Cold forming of Titanium 6Al-6V-2Sn is difficult because of its high strength and the large amount of spring-back that results. This grade can be welded by the inert gas shielded, fusion welding process but the heat effected area will have less ductility and toughness than the parent material. The hardness of Titanium 6-6-2 is approximately Rockwell C 36-38. This grade is primarily used for airframe and jet engine parts, rocket engine cases and ordinance components. Please call us to determine our minimum item quantity. |
Airframe Components
Jet Engine Parts
Ordinance Components
Rocket Engine Cases |
AMS 4981
MIL-T-9047 |
Bar
Wire Sheet
Plate
Forgings
Fittings
Flanges
Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube |
Titanium
6Al 2Sn 4Zr 6Mo
|
Titanium 6Al-2Sn-4Zr-6Mo is an Alpha-Beta Alloy and it’s generally regarded as the workhorse alloy of the titanium industry. The alloy is fully heat-treatable in section sizes up to one inch and is used up to approximately 400°C (750°F). Since it is one of the most commonly used alloys (over 70% of all alloy grades melted are a sub-grade of Ti-6-4,) its uses span many aerospace engine and airframe components. Titanium 6Al-2Sn-4Zr-6Mo is also used in lots of non-aerospace applications such as marine, offshore and power generation industries. This Alpha-Beta Alloy combines good corrosion resistance and strength with weldability and fabricability. The alloy is generally available in bar form and it’s typically used in deep sour well applications. This alloy can be hot or cold formed. Please call us to determine our minimum item quantity. |
Aerospace Engines
Airframe Components
Marine Applications
Offshore Applications
Power Generation Applications |
AMS 4981
|
Bar
Plate
Sheet |
Titanium
8-1-1
Titanium
8Al-1Mo-1V
|
Titanium 8Al-1Mo-1V is a near Alpha Alloy that was primarily designed for use at elevated temperatures - up to 455 degrees centigrade. It offers the highest modulus and lowest density of all Titanium alloys. It has good creep strength and it’s weldable by the inert gas fusion and resistance-welding processes. Titanium 8Al-1Mo-1V is used in the annealed condition for such applications as airframe and jet engine parts that demand high strength, superior creep resistance and a good stiffness-to-density ratio. The machinability of this grade is similar to that of Titanium 6Al-4V. Please call us to determine our minimum item quantity. |
Airframe Parts
Jet Engine Parts |
MIL-T-9046
MIL-T-9047
AMS 4972
AMS 4915
AMS 4973
AMS 4955
AMS 4916 |
Forgings
Bar
Sheet
Plate
Strip
Extrusions
Wire |
Titanium
10V 2Fe 3Al
|
Titanium 10V-2Fe-3Al is a Titanium Beta Alloy. It is harder and stronger than many titanium alloys. This Titanium is a heat treatable alloy, it’s weldable and it’s easily formed. Titanium 10V-2Fe-3Al is an all Beta Alloy and is more difficult to machine than most titanium alloys. The chief problems include flank wear, spring-back and chip control. Because of these characteristics, positive rake chip grooves in combination with light hones on the cutting edge are advantageous. Please call us to determine our minimum item quantity. |
Airframe Components
Compressor Blades, Disks, Wheels and Spacers |
AMS 4983
AMS 4984
AMS 4986
AMS 4987 |
Bar
Forgings
Plate
Sheet
Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
Wire
|
Titanium
15V-3Cr-3Sn-3Al
|
This Metastable-Beta Alloy is used primarily in sheet metal form. It is age-hardenable and highly cold-formable. Titanium 15V-3-3-3 is often used to replace hot-formed Titanium Grade 5 (6Al-4V) sheet. It can also be produced as foil and is an excellent alloy for castings. For aerospace applications, this grade is often specified as AMS 4914. Please call to determine the minimum item quantity. |
Aerospace Tank Applications
Airframe Applications
Castings
Fasteners
High Strength Hydraulic Tubing |
AMS 4914
ASTM B265 |
Sheet
Foil |
| Titanium Alpha Alloys
|
Commercially pure titanium and alpha alloys of titanium are non-heat treatable and have very good welding characteristics. |
Cryogenic applications
Airplane parts
Chemical processing equipment |
AMS 4973
AMS 4976
AMS 4924
AMS 4972
MIL-T-9047
AMS 4910
ASTM B265
GR-6 MIL-T9046
AMS 4909
AMS 4915/4916
AMS 4966
AMS 4924
AMS 4973
AMS 4933
MIL-T-81556A A-1
MIL-T-81556A A-2
MIL-T-81556A A-4 |
Bar
Forgings
Plate
Sheet Extrusions |
| Titanium Beta Alloys
|
Titanium Beta or near Beta Alloys are:
- Fully heat treatable Generally weldable
- Capable of high strengths Possess good creep resistance up to intermediate temperatures
- In the solution treated condition, excellent formability can be expected from Beta Alloys
Titanium Beta Alloys are ideal for sporing applications. Common Titanium Beta Alloys include:
Ti3Al8V6Cr4Mo4Zr
ASTM Grade 19
Ti-3Al-8V-6Cr-4Mo-4Zr
AMS 4983, 4984, 4987
Ti-10V-2Fe-3Al
ASTM Grade 21
Ti-15Mo-3Nb-3Al-2Si
AMS 4914
Ti-15V-3Cr-3Sn-3Al
The Metastable Titanium Beta Alloys are heat treatable by solution treatment and ageing. Fully stable beta alloys can only be annealed. |
Aerospace |
AMS 4914
AMS 4983
AMS 4984
AMS 4987
ASTM Grade 19
ASTM Grade 21 |
Forgings
|
| Titanium Alpha-Beta Alloys
|
Titanium Alpha Beta alloys are heat treatable and most of them are also weldable. The typical properties of Titanium Alpha Beta Alloys are:
- Medium to high strength levels;
- High temperature creep strength is not as less than most alpha alloys;
- Limited cold forming but hot forming qualities are normally good;
The most commonly used Titanium Alpha Beta Alloy is Ti 6Al-4V. Titanium 6Al-4V has been developed in many variations of the basic formulation for numerous and widely differing applications.
Other Titanium Alpha Beta Alloys include: 6Al-4V-ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 3Al-2.5V 8Mn |
Aircraft and aircraft turbine parts
Chemical processing equipment
Marine hardware
Prosthetic devices |
ASME SB-265
AMS 4911
ASME SB-348
AMS 4928
AMS 4965
AMS 4967
AMS 4981
MIL-T-9047
AMS 4930
AMS 4971
AMS 4907
ASTM F 136
MIL-T-9046
AMS 4918
DMS1879/2237
AMS 4908
AMS 4943
ASTM B348
AMS 4975
MIL-T-9047 G
AMS 4928
BMS 7-348
DMS 1570
AMS 4976
AMS 4920
AMS 4934 |
Bar
Fittings
Flanges
Forgings
Pipe
Plate
Sheet
Tube
Wire |
